DESCRIPTION:
Acrylic water dispersion paint. Due to high flexibility of the film it is prevented cracking and peeling of coating after weathering. Excellent UV radiation resistance provides long-term durability of a paint ( 10 – 12 years ). Contains fungicides for protection against appearance of mold, algae, etc. within 10 years.
FIELD OF APPLICATION:
Intended for painting external surfaces of concrete, plastered and brick buildings and structures exploited in atmospheric conditions. Can also be used for repair painting of surfaces previously painted with acrylic water dispersion paints. It is allowed to apply on surfaces previously painted with alkyd enamels. In this case it is necessary to perform a test painting on a small surface area with subsequent intercoat adhesion testing.
TECHNICAL PARAMETERS:
| Colour: | White (A base) which may be tinted to light shades. C base may be tinted to dark shades using RILAKOLOR tinting system; black |
| Gloss: | Matt |
| Drying time at 20ºC temperature: | No more than 1 hour |
| – Solids by weight, % | 55 ± 5 , depending on the selected color shade |
| Vapor permeability ( Sd – coefficient of diffusion ability, m ) | 0.115 |
| Consumption: | – 8 – 10 m2/litre – on previously primed surfaces – 6 – 8 m²/litre – on raw surfaces – 9 – 11 m²/litre – for repair painting surfaces previously coated with alkyd paints. |
| Solvent: | Water |
| Tools used for application: | Brush, roller, paint sprayer. For airless spray the recommended nozzle diameter is 0,017 — 0,021″. |
| Storage period: | 36 months in tightly closed manufacturer’s container at the temperature exceeding +5ºC. |
An Environmental Product Declaration (EPD) Type III has been developed for the FORAKRIL product. The document is prepared in accordance with the requirements of ISO 14025 and EN 15804 standards and is published in the international EPD system.
PREPARATION OF PAINT FOR USE:
Stir carefully before use. If necessary thin with water to working viscosity : up to 5 % by volume when applied with brush or roller; up to 20 % by volume when applied by spray.
PREPARATION OF SURFACE:
The substrate to be painted must be sound and structurally intact (free from defects that could affect the painting process or subsequent performance). Remove all chalk, loose or flaking paint, and contaminants (such as oil residues, salt deposits, etc.) thoroughly using appropriate cleaning agents. It is essential to identify and eliminate the source of salt or chemical efflorescence; failure to do so may result in defects either after painting or during service life. If visible mould contamination is present, disinfect the surface with AKVASEPT solution.
Before painting, ensure that newly plastered surfaces, concrete, or fibre cement boards are fully dried; the minimum required drying period depends on the substrate type and drying conditions.
PRIMING OF SURFACE:
For porous surfaces it is recommended preliminary use deep impregnation primer FORAKRIL BASE. In order to achieve the maximum possible protection against moisture treatment with waterproofing primer FORAKRIL PRIMER must be performed. For priming we can also use the same paint FORAKRIL, pre-diluted with water up to 25 % by volume.
APPLICATION:
Apply in 1–2 coats at an air and substrate temperature not below +5°C and not above +35°C. The relative air humidity should not exceed 85%; optimal conditions are +15…+25°C with 50–60% relative humidity. Each coat should be applied continuously, without interruptions; on large surfaces, breaks should only occur at surface edges or corners. Do not paint on damp or wet surfaces.
Avoid application during cold, humid (rain, fog, dew), or windy conditions, as well as when the surface is exposed to direct sunlight.
Do not apply paint to surfaces that are overheated by sunlight.
TOOL CLEANING:
Use water for cleaning of tools.
DESCRIPTION:
Acrylic water dispersion paint. Due to high flexibility of the film it is prevented cracking and peeling of coating after weathering. Excellent UV radiation resistance provides long-term durability of a paint ( 10 – 12 years ). Contains fungicides for protection against appearance of mold, algae, etc. within 10 years.
FIELD OF APPLICATION:
Intended for painting external surfaces of concrete, plastered and brick buildings and structures exploited in atmospheric conditions. Can also be used for repair painting of surfaces previously painted with acrylic water dispersion paints. It is allowed to apply on surfaces previously painted with alkyd enamels. In this case it is necessary to perform a test painting on a small surface area with subsequent intercoat adhesion testing.
TECHNICAL PARAMETERS:
| Colour: | White (A base) which may be tinted to light shades. C base may be tinted to dark shades using RILAKOLOR tinting system; black |
| Gloss: | Matt |
| Drying time at 20ºC temperature: | No more than 1 hour |
| – Solids by weight, % | 55 ± 5 , depending on the selected color shade |
| Vapor permeability ( Sd – coefficient of diffusion ability, m ) | 0.115 |
| Consumption: | – 8 – 10 m2/litre – on previously primed surfaces – 6 – 8 m²/litre – on raw surfaces – 9 – 11 m²/litre – for repair painting surfaces previously coated with alkyd paints. |
| Solvent: | Water |
| Tools used for application: | Brush, roller, paint sprayer. For airless spray the recommended nozzle diameter is 0,017 — 0,021″. |
| Storage period: | 36 months in tightly closed manufacturer’s container at the temperature exceeding +5ºC. |
An Environmental Product Declaration (EPD) Type III has been developed for the FORAKRIL product. The document is prepared in accordance with the requirements of ISO 14025 and EN 15804 standards and is published in the international EPD system.
PREPARATION OF PAINT FOR USE:
Stir carefully before use. If necessary thin with water to working viscosity : up to 5 % by volume when applied with brush or roller; up to 20 % by volume when applied by spray.
PREPARATION OF SURFACE:
The substrate to be painted must be sound and structurally intact (free from defects that could affect the painting process or subsequent performance). Remove all chalk, loose or flaking paint, and contaminants (such as oil residues, salt deposits, etc.) thoroughly using appropriate cleaning agents. It is essential to identify and eliminate the source of salt or chemical efflorescence; failure to do so may result in defects either after painting or during service life. If visible mould contamination is present, disinfect the surface with AKVASEPT solution.
Before painting, ensure that newly plastered surfaces, concrete, or fibre cement boards are fully dried; the minimum required drying period depends on the substrate type and drying conditions.
PRIMING OF SURFACE:
For porous surfaces it is recommended preliminary use deep impregnation primer FORAKRIL BASE. In order to achieve the maximum possible protection against moisture treatment with waterproofing primer FORAKRIL PRIMER must be performed. For priming we can also use the same paint FORAKRIL, pre-diluted with water up to 25 % by volume.
APPLICATION:
Apply in 1–2 coats at an air and substrate temperature not below +5°C and not above +35°C. The relative air humidity should not exceed 85%; optimal conditions are +15…+25°C with 50–60% relative humidity. Each coat should be applied continuously, without interruptions; on large surfaces, breaks should only occur at surface edges or corners. Do not paint on damp or wet surfaces.
Avoid application during cold, humid (rain, fog, dew), or windy conditions, as well as when the surface is exposed to direct sunlight.
Do not apply paint to surfaces that are overheated by sunlight.
TOOL CLEANING:
Use water for cleaning of tools.
Find out how much of the product You will need.
Daugavgrīvas iela 63/65, Rīga, LV-1007
Reģistrācijas Nr.: 40003284444
PVN Nr.: LV40003284444
Banka: A/S Swedbank
Konts: LV23HABA0019308047593
Bankas kods: HABALV22
