Putties - LUKSOPLAST F

LUKSOPLAST F Finishing putty

Information

  • The product is designed for interior use
  • Product can be stored only at temperatures above +5°C
  • Use water for diluting and tools cleaning
  • Drying time 2 h
  • Packaging 15 kg, 1.5 kg, 7.5 kg
  • Consumption 1.5÷2.0 kg/m²

Finely grained acrylic water-based putty for final finishing of surfaces. Forms easily sandable white dense surface. May be used for finishing of interior mineral surfaces (plaster, concrete, etc.), as well as uneveness of gypsum boards. May be used for a local smoothing of small surface irregularities (joints, cracks, gaps) and also for finishing of the entire surface.

APPLICATION:

Remove dirt and dust contamination from the surfaces. Apply, using a putty knife on dry surface. Thickness of the applied layer – up to 2 mm. The temperature of the ambient air and processed surface during the application and drying must be at least +5ºC and not higher than +30ºC. Relative air moisture may not exceed 85%. Drying time for layer 1 mm thickness at (20±2)ºC  temperature – 2 hours.

You have been subscribed to our newsletter.