Advice - How to apply decorative plaster SAMAN

Advice - How to apply decorative plaster SAMAN

← All advices

How to apply decorative plaster SAMAN

1. Application of primer.

Prior to plastering surface has to be coated by KVARC primer.

2. Application of SAMAN plaster.

Recreating of relief structure: SAMAN has to be applied by rectangular or trapezoidal trowel in criss-cross or wavy  manner keeping light pressure on to the tool. Too rough areas can subsequently be smoothened by brush.

3. Application of tinted CERA wax.

Developing of structure by means of application of tinted CERA wax. CERA has to be evenly applied by brush or woollen glove on to 1÷2 m² surface area unit using multidirectional or circular movements. 

4. CERA wax spreading (washing).

While CERA is still wet surface has to be worked by woollen glove again in order to ensure uniform wax spreading all over the surface.

5. The surface is done.

In case high degree of washability is required it is recommended to seal the surface by transparent varnish of required degree of gloss (EKOAKVA, LUOTEN or PANEĻU LAKA can be used). Varnishing of surface helps also to reveal contrast of the structure. In case pearlescent sparkling effect is desired it is also possible (optional) to admix pearlescent powder PERLIUM of required colour directly to the lacquer prior to its application. 

You have been subscribed to our newsletter.