Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

AKROPRIM

Concentrated deeply impregnating primer for mineral surfaces
For interior use
For exterior use
The product can be applied by roller
The product can be applied by brush
Use water for diluting and tools cleaning
Drying time 1 h
Packaging 1 l, 5 l
Product can be stored only at temperatures above 5 ºC
Consumption 4 - 10 m²/l (working solution)
Nearest store
Consumption calculator
Description
Usage

AKROPRIM concentrated primer is intended for priming porous mineral surfaces (plaster, concrete, bricks, plasterboard, etc.) before painting them with water dispersion and acrylic paints based on white spirit. Sold as a concentrate. Can be used indoors and outdoors. AKROPRIM has a high penetration (permeation) ability, due to which its use provides: improvement of adhesion of paints to the surface coated; reduction of paint consumption; even absorption capacity of the entire surface painted, thus improving the decorative properties of the coating.

AKROPRIM is diluted before use with water, the amount of which depends on the type of surface and its porosity. The following ratios are recommended.*

Surface

Dilution ratio
AKROPRIM, parts

Water, parts

concrete, bricks

14÷5
plasterboard1

3÷4

plaster

1

2÷3

The product is applied on clean, dry surfaces in 1 to 2 coats with a paint brush, roller or spray gun, if the air and paintable surface temperature is not lower than +5 °C and relative air humidity does not exceed 85%. Consumption of working solution is 4 to 10 m2/l depending on the absorption capacity of the surface. Drying time: at 20 °C: 1 hour, at +5 °C: 2 to 3 hours. Use warm water and soap to wash work tools. Store in a tightly sealed container at a temperature above 0 °C.

Need help?
info@rilak.lv
+371 67 458 776
Question about the product
Description

AKROPRIM concentrated primer is intended for priming porous mineral surfaces (plaster, concrete, bricks, plasterboard, etc.) before painting them with water dispersion and acrylic paints based on white spirit. Sold as a concentrate. Can be used indoors and outdoors. AKROPRIM has a high penetration (permeation) ability, due to which its use provides: improvement of adhesion of paints to the surface coated; reduction of paint consumption; even absorption capacity of the entire surface painted, thus improving the decorative properties of the coating.

Usage

AKROPRIM is diluted before use with water, the amount of which depends on the type of surface and its porosity. The following ratios are recommended.*

Surface

Dilution ratio
AKROPRIM, parts

Water, parts

concrete, bricks

14÷5
plasterboard1

3÷4

plaster

1

2÷3

The product is applied on clean, dry surfaces in 1 to 2 coats with a paint brush, roller or spray gun, if the air and paintable surface temperature is not lower than +5 °C and relative air humidity does not exceed 85%. Consumption of working solution is 4 to 10 m2/l depending on the absorption capacity of the surface. Drying time: at 20 °C: 1 hour, at +5 °C: 2 to 3 hours. Use warm water and soap to wash work tools. Store in a tightly sealed container at a temperature above 0 °C.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
AKROPRIM
4 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help