Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

EKOAKVA

Semi-gloss water-soluble acrylic varnish
For interior use
The product can be applied by roller
The product can be applied by brush
The product can be applied with spray gun
The product can be tinted
Use water for diluting and tools cleaning
Drying time 1 h
Packaging 0.9 l, 2.7 l, 9 l
Product can be stored only at temperatures above 5 ºC
Consumption 8 - 10 m²/l
Nearest store
Consumption calculator
Tinting
Description
Usage

Semi-gloss water-soluble acrylic varnish is intended for indoors, for varnishing wooden, concrete, plaster and brick surfaces that are not subject to intensive mechanical load (for example, walls).

When applied, the varnish is opaque, but during drying (after about 30 minutes) the coating becomes fully transparent. Drying time of each coat at 20 ± 2 °C: 1 hour. Stir the varnish thoroughly before use, dilute with water if necessary. Apply on clean, dry surfaces in 2 to 3 coats using a paint brush, roller or spray gun. Air temperature must not be lower than +5 °C. Drying time of each coat at 20 °C: 1 hour. The varnish can be tinted (Base EC). Varnish consumption for one coat: 8 to 10 m2/l. Use warm water and soap to wash painting tools. Storage temperature: not lower than +5 °C.

Need help?
info@rilak.lv
+371 67 458 776
Question about the product
Description

Semi-gloss water-soluble acrylic varnish is intended for indoors, for varnishing wooden, concrete, plaster and brick surfaces that are not subject to intensive mechanical load (for example, walls).

Usage

When applied, the varnish is opaque, but during drying (after about 30 minutes) the coating becomes fully transparent. Drying time of each coat at 20 ± 2 °C: 1 hour. Stir the varnish thoroughly before use, dilute with water if necessary. Apply on clean, dry surfaces in 2 to 3 coats using a paint brush, roller or spray gun. Air temperature must not be lower than +5 °C. Drying time of each coat at 20 °C: 1 hour. The varnish can be tinted (Base EC). Varnish consumption for one coat: 8 to 10 m2/l. Use warm water and soap to wash painting tools. Storage temperature: not lower than +5 °C.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
EKOAKVA
8 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help