Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

EPOPRIM

Two-component anti-corrosion epoxy primer
For interior use
For exterior use
The product can be applied by roller
The product can be applied by brush
The product can be applied with spray gun
Use appropriate solvent for diluting and tools cleaning
Mix the components before use in the proportions indicated on the label
Drying time 4 h
Packaging 0.65L, 2.6 L, 3.3 l , 11 l
Consumption 6 - 12 m²/l
Nearest store
Consumption calculator
Description
Usage
  • Fast drying
  • Corrosion protection for steel surfaces
  • Excellent adhesion to steel, aluminium, and galvanized substrates

 

DESCRIPTION:

 

EPOPRIM is a fast-drying, two-component epoxy primer with outstanding adhesion to metal surfaces. Due to its excellent adhesion and the presence of effective anti-corrosion pigments, EPOPRIM provides reliable long-term protection against corrosion, ensuring durable performance even under atmospheric exposure. The primer is resistant to chemical agents (diluted alkali and mild acid solutions, solvents, gasoline, oils, etc.).

 

FIELD OF APPLICATION:

 

Intended for priming steel, aluminum, and galvanized surfaces exposed to atmospheric conditions, prior to overcoating with epoxy or polyurethane enamels. Indoors, or in atmospheric conditions without intense sunlight (e.g., under a canopy), it can be used as a standalone, hard, and wear-resistant coating with good resistance to chemical agents. Also used for coating metal garages, fences, railings, gratings, beams, etc. Recommended for use in coating systems with polyurethane and epoxy enamels. The use of alkyd and urethane-alkyd enamels as a topcoat is not permitted.

It is permitted to use this product for coating concrete floors in industrial food processing facilities, with moderate abrasive loads.

 

TECHNICAL PARAMETERS:

Colour:grey
Solids by weight, %77 ± 2
Drying time at 20ºC temperature:See Table 1

 

t0C

Drying time,

h ,

not more than

Pot-life  after  mix  with   

   Hardener,

h

not more than

Recoating  interval for EPOPRIM

recoating  interval for topcoat  PU  enamels

min

max*min

max*

+10

 

7124 h

12 days

8 h12 days
+20

 

481,5 h6 days3 h

6 days

*- If maximum recoat time is exceeded, surface must be sanded to improve adhesion before applying subsequent coats.

Consumption:10 ÷ 12,5  m²/ l  for one layer with a dry film thickness of 40 – 50 μm  (not including losses during application )

Primers film thicknes,  μm

Necessary  number  of  layers

Theoretical spreading rate (base with  hardener ) ,

m²/l

Dry Film

Wet  film (without  solvent)

50

85

1

12

100

170

1-2

6

 

Solvent:646
Tools used for application:Brush, roller, spray or airless spray ( nozzle diameter 0,011” – 0,019” ).
Storage period:4 years from the date of manufacture in tightly closed

manufacturer’s container at temperatures not exceeding +30°C.

Packaging:0.65 L (0.905 kg), 2.6 L (3.607 kg), 3.3 L (4.5 kg), 11 L (15 kg)

 

Surface preparation:

 Steel surfaces. Rust and dirt must be removed from the surface to be painted beforehand by abrasive metal treatment (sandblasting or shot blasting, manual machining) to a degree of purity of Sa 2½ or St 2. In cases where complete cleaning of the surface from corrosion products is not possible, it is necessary to clean at least the loose rust layer and perform the maximum possible surface treatment with abrasive tools such as sandpaper, steel brush, power grinders, etc. In this case, a possible reduction in the anti-corrosion effectiveness should be taken into account. Prior to painting, aluminium and galvanized surfaces should be degreased and lightly treated with fine-grained sandpaper or a weak abrasive blast, washed with 5% aqueous ammonia solution and dried.

Use:

Before use, stir the semi-finished primer product thoroughly and add the hardener: 18 parts by weight of hardener to 100 parts by weight of semi-finished product. After thorough mixing, the primer should be left for 45 minutes before use. If necessary, dilute the primer to working viscosity with solvents 646, 647, using the following amounts of solvents by weight: 5 to15% – when applied with a paint brush or roller; 10 to 20% – when applied with an air sprayer; 0 to 10% – when applied with airless spray equipment. Use the same solvents to clean the tools. Apply with a paint brush, roller, spray gun or airless spray equipment with a nozzle diameter of 0.011″ to 0.019″. The air and paintable surface temperature during painting must not be lower than +10 °C, relative air humidity – not higher than 85%. The drying time and permissible curing times until the application of the next coats of primer or enamel are given in Table 1. If the time to repainting is longer than specified, additional treatment of EPOPRIM surface with fine sandpaper is recommended to improve the adhesion of subsequent coats. The consumption of EPOPRIM primer is shown in Table 2. Taking into account the strong influence of the thickness of the primer film on the anti-corrosion properties of the coating, the recommended thickness of the primer coat after drying is not less than 50 μm.

Storage:

Store in a tightly sealed container at a temperature not exceeding +30 °C.

Need help?
info@rilak.lv
+371 67 458 776
Question about the product
Description
  • Fast drying
  • Corrosion protection for steel surfaces
  • Excellent adhesion to steel, aluminium, and galvanized substrates

 

DESCRIPTION:

 

EPOPRIM is a fast-drying, two-component epoxy primer with outstanding adhesion to metal surfaces. Due to its excellent adhesion and the presence of effective anti-corrosion pigments, EPOPRIM provides reliable long-term protection against corrosion, ensuring durable performance even under atmospheric exposure. The primer is resistant to chemical agents (diluted alkali and mild acid solutions, solvents, gasoline, oils, etc.).

 

FIELD OF APPLICATION:

 

Intended for priming steel, aluminum, and galvanized surfaces exposed to atmospheric conditions, prior to overcoating with epoxy or polyurethane enamels. Indoors, or in atmospheric conditions without intense sunlight (e.g., under a canopy), it can be used as a standalone, hard, and wear-resistant coating with good resistance to chemical agents. Also used for coating metal garages, fences, railings, gratings, beams, etc. Recommended for use in coating systems with polyurethane and epoxy enamels. The use of alkyd and urethane-alkyd enamels as a topcoat is not permitted.

It is permitted to use this product for coating concrete floors in industrial food processing facilities, with moderate abrasive loads.

 

TECHNICAL PARAMETERS:

Colour:grey
Solids by weight, %77 ± 2
Drying time at 20ºC temperature:See Table 1

 

t0C

Drying time,

h ,

not more than

Pot-life  after  mix  with   

   Hardener,

h

not more than

Recoating  interval for EPOPRIM

recoating  interval for topcoat  PU  enamels

min

max*min

max*

+10

 

7124 h

12 days

8 h12 days
+20

 

481,5 h6 days3 h

6 days

*- If maximum recoat time is exceeded, surface must be sanded to improve adhesion before applying subsequent coats.

Consumption:10 ÷ 12,5  m²/ l  for one layer with a dry film thickness of 40 – 50 μm  (not including losses during application )

Primers film thicknes,  μm

Necessary  number  of  layers

Theoretical spreading rate (base with  hardener ) ,

m²/l

Dry Film

Wet  film (without  solvent)

50

85

1

12

100

170

1-2

6

 

Solvent:646
Tools used for application:Brush, roller, spray or airless spray ( nozzle diameter 0,011” – 0,019” ).
Storage period:4 years from the date of manufacture in tightly closed

manufacturer’s container at temperatures not exceeding +30°C.

Packaging:0.65 L (0.905 kg), 2.6 L (3.607 kg), 3.3 L (4.5 kg), 11 L (15 kg)

 

Usage

Surface preparation:

 Steel surfaces. Rust and dirt must be removed from the surface to be painted beforehand by abrasive metal treatment (sandblasting or shot blasting, manual machining) to a degree of purity of Sa 2½ or St 2. In cases where complete cleaning of the surface from corrosion products is not possible, it is necessary to clean at least the loose rust layer and perform the maximum possible surface treatment with abrasive tools such as sandpaper, steel brush, power grinders, etc. In this case, a possible reduction in the anti-corrosion effectiveness should be taken into account. Prior to painting, aluminium and galvanized surfaces should be degreased and lightly treated with fine-grained sandpaper or a weak abrasive blast, washed with 5% aqueous ammonia solution and dried.

Use:

Before use, stir the semi-finished primer product thoroughly and add the hardener: 18 parts by weight of hardener to 100 parts by weight of semi-finished product. After thorough mixing, the primer should be left for 45 minutes before use. If necessary, dilute the primer to working viscosity with solvents 646, 647, using the following amounts of solvents by weight: 5 to15% – when applied with a paint brush or roller; 10 to 20% – when applied with an air sprayer; 0 to 10% – when applied with airless spray equipment. Use the same solvents to clean the tools. Apply with a paint brush, roller, spray gun or airless spray equipment with a nozzle diameter of 0.011″ to 0.019″. The air and paintable surface temperature during painting must not be lower than +10 °C, relative air humidity – not higher than 85%. The drying time and permissible curing times until the application of the next coats of primer or enamel are given in Table 1. If the time to repainting is longer than specified, additional treatment of EPOPRIM surface with fine sandpaper is recommended to improve the adhesion of subsequent coats. The consumption of EPOPRIM primer is shown in Table 2. Taking into account the strong influence of the thickness of the primer film on the anti-corrosion properties of the coating, the recommended thickness of the primer coat after drying is not less than 50 μm.

Storage:

Store in a tightly sealed container at a temperature not exceeding +30 °C.

Question about the product
Patēriņa kalkulators

Useful advice

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
EPOPRIM
6 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help