Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

FURNICOLOR PRO

Staining agent for wooden surfaces on a solvent base
For interior use
The product can be applied by roller
The product can be applied by brush
The product can be applied with spray gun
Use appropriate solvent for diluting and tools cleaning
Drying time 0.1 h
Packaging 1 l
Consumption 15 - 25 m²/l
Nearest store
Consumption calculator
Description
Usage

FURNICOLOR PRO is intended for staining wooden surfaces of indoor furniture before varnishing. FURNICOLOR PRO does not form a film. 12 basic tones.  You can combine 12 basic compositions to obtain the desired tone.

Apply the product on clean dry surfaces with a swab, brush or sprayer in 1–2 coats. It is also possible to add 5–10% FURNICOLOR PRO to the following varnishes to give the desired shade:

– nitrocellulose lacquers intended for priming (including NITROBASE);

– varnishes with acid hardener (when used for priming), including DUOKRON two-component parquet varnish manufactured by RLKR;

– urethane alkyd varnishes (when used for priming), including AURLAK varnish.

A compatibility test is necessary before tinting other varnishes. If paint intensity needs to be reduced, FURNICOLOR PRO may be diluted with solvent 646. Drying time at +20 ºC is 10 minutes. Consumption is 15–25 m²/l.

Need help?
info@rilak.lv
+371 67 458 776
Question about the product
Description

FURNICOLOR PRO is intended for staining wooden surfaces of indoor furniture before varnishing. FURNICOLOR PRO does not form a film. 12 basic tones.  You can combine 12 basic compositions to obtain the desired tone.

Usage

Apply the product on clean dry surfaces with a swab, brush or sprayer in 1–2 coats. It is also possible to add 5–10% FURNICOLOR PRO to the following varnishes to give the desired shade:

– nitrocellulose lacquers intended for priming (including NITROBASE);

– varnishes with acid hardener (when used for priming), including DUOKRON two-component parquet varnish manufactured by RLKR;

– urethane alkyd varnishes (when used for priming), including AURLAK varnish.

A compatibility test is necessary before tinting other varnishes. If paint intensity needs to be reduced, FURNICOLOR PRO may be diluted with solvent 646. Drying time at +20 ºC is 10 minutes. Consumption is 15–25 m²/l.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
FURNICOLOR PRO
15 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help