Acrylic ceiling paint is a cost-effective option for painting ceilings in warehouses, garages, and other utility spaces.
DESCRIPTION:
Water-based acrylic paint that forms a deep matte finish, resistant to repainting with the same or similar paint.
Areas of Application:
Intended for painting ceilings, plastered walls, and other mineral surfaces in dry rooms with low usage intensity (warehouses, garages, etc.).
TECHNICAL PARAMETERS:
| Colour: | White. |
| Gloss: | Deep matt |
| Drying time at 20ºC temperature and the relative air humidity 50 %: | 1 hour |
| Solids contents, % | 64 ± 3. |
| Density, g/ml | 1,65 ± 0,05 |
| Resistance to wet friction: | Class IV (ISO 11998) |
| Consumption: | 7÷10 m2/l |
| Solvent: | Water |
| Tools used for application: | Brush, roller, paint sprayer. |
| Storage period: | 36 months in tightly closed manufacturer’s container at the temperature from+50C to +300C. |
PREPARATION OF PAINT FOR USE:
Mix paint well before application. Dilute with water till required viscosity, if necessary.
PREPARATION OF SURFACE:
Clean off any dust, dirt, chalk, previously painted coat of glue paint or other type of old flaked paint. Treat the oil- or alkyd-painted surfaces with sandpaper until light-matte appearance is reached.
PRIMING OF SURFACE:
Porous plaster and concrete surfaces should be primed using FORAKRIL BASE, AKROPRIM or LATEKSIL paint itself diluted in water up to 15% of the paint volume in advance.
APPLICATION:
Apply 2 layers to surfaces to be painted. Application of 1 – 2 layers is recommended in case of repainting of the previously painted surfaces. Air and painted surface temperature may not be lower than + 5ºC. The coating achieves its full hiding power after drying.
TOOL CLEANING:
Use water for cleaning of tools.
Acrylic ceiling paint is a cost-effective option for painting ceilings in warehouses, garages, and other utility spaces.
DESCRIPTION:
Water-based acrylic paint that forms a deep matte finish, resistant to repainting with the same or similar paint.
Areas of Application:
Intended for painting ceilings, plastered walls, and other mineral surfaces in dry rooms with low usage intensity (warehouses, garages, etc.).
TECHNICAL PARAMETERS:
| Colour: | White. |
| Gloss: | Deep matt |
| Drying time at 20ºC temperature and the relative air humidity 50 %: | 1 hour |
| Solids contents, % | 64 ± 3. |
| Density, g/ml | 1,65 ± 0,05 |
| Resistance to wet friction: | Class IV (ISO 11998) |
| Consumption: | 7÷10 m2/l |
| Solvent: | Water |
| Tools used for application: | Brush, roller, paint sprayer. |
| Storage period: | 36 months in tightly closed manufacturer’s container at the temperature from+50C to +300C. |
PREPARATION OF PAINT FOR USE:
Mix paint well before application. Dilute with water till required viscosity, if necessary.
PREPARATION OF SURFACE:
Clean off any dust, dirt, chalk, previously painted coat of glue paint or other type of old flaked paint. Treat the oil- or alkyd-painted surfaces with sandpaper until light-matte appearance is reached.
PRIMING OF SURFACE:
Porous plaster and concrete surfaces should be primed using FORAKRIL BASE, AKROPRIM or LATEKSIL paint itself diluted in water up to 15% of the paint volume in advance.
APPLICATION:
Apply 2 layers to surfaces to be painted. Application of 1 – 2 layers is recommended in case of repainting of the previously painted surfaces. Air and painted surface temperature may not be lower than + 5ºC. The coating achieves its full hiding power after drying.
TOOL CLEANING:
Use water for cleaning of tools.
Find out how much of the product You will need.
Daugavgrīvas iela 63/65, Rīga, LV-1007
Reģistrācijas Nr.: 40003284444
PVN Nr.: LV40003284444
Banka: A/S Swedbank
Konts: LV23HABA0019308047593
Bankas kods: HABALV22
