Intended for priming wooden parquet floors before varnishing with NEOKRON (gloss) or NEOKRON M (semi-matte). Forms a hard sandable film (not suitable for priming parquet and other wood products made of some types of beech as well as diamond pine).

Stir the varnish before use. The varnish can be diluted with water to the working viscosity if necessary. The surface to be primed must be dry. Sanding dust must be removed from it. The air and surface temperature must not be below +10 °C. Protect from direct sunlight and draught during varnish application. Priming is done with a brush or roller in 1 coat or with a special stainless blade in 2–3 coats. Consumption per coat is: 8–10 m²/l when applied with a roller or brush, 15–20 m²/l when applied with the special stainless steel blade. Drying time at +20 ºC is 4 hours. It is recommended to sand the primed surface before applying the top coat varnish (if priming is done with the special stainless steel blade, sanding is usually not necessary). Curing time before sanding, as well as before applying the top coat varnish is not less than 6 hours. Use water to clean work tools.  Dried varnish residue can be removed with acetone or solvent 646. Store in a tightly closed container at a temperature not lower than +5 °C.