Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NEOSPRINT PRIMER

Quick-drying primer on an epoxy ester polymer base
For interior use
For exterior use
The product can be applied by roller
The product can be applied by brush
The product can be applied with spray gun
Use appropriate solvent for diluting and tools cleaning
Drying time 1 h
Packaging 0.9 l, 2.7 l, 10 l
Consumption 6.8 - 12 m²/l (for one layer. The thickness of the dry film is 40 ÷ 70 μm)
Nearest store
Consumption calculator
Description
Usage

The quick-drying primer on an epoxy ester polymer base is intended for priming steel, galvanized and aluminium surfaces for outdoor use. Contains effective anti-corrosion pigments. Alkyd and urethane alkyd enamels on a white spirit base (PENTAPRIM, PENTALUX T, PENTATOP UNIVERSAL, NEOSPRINT 30) as well as water-soluble RIALKID enamels are recommended as top coats after application of the primer.

Steel surfaces must be free of dirt and corrosion products (rust) and degreased prior to application. Prior to priming, galvanized and aluminium surfaces must be degreased, lightly treated with fine sandpaper or light abrasive blast, washed with 5% aqueous ammonia solution and dried. The air and treatable surface temperature must not be below +5 °C. Air humidity must be not higher than 85%. Apply the primer in 1–2 coats on a clean dry surface with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011²¸0.017²). Dilute the primer with a solvent (SOLVEKS, SOLVEKS SPRINT, xylene) if necessary: up to 8% by volume when applied with a roller or brush. Application of primer by spraying is allowed only in painting facilities of industrial plants and workshops. The same solvents are also used to wash work tools. The drying and curing times until the application of next coats are shown in Table 1. Information on primer consumption for different coating thicknesses (excluding losses during application) is given in Table 2.

Table 1

Temperature of the air and surface to be primed Drying time,

min

Curing time until application of the second coat of NEOSPRINT PRIMER,

h

Curing time until enamel application, h, not less than

Not less than

Not more than

 +10 ºC

601.5  6 *1
 +20 ºC455 *   1

*(if the second coat has not been applied within the specified time after the first coat, then it may be applied only 7 days after application of the first coat)

Table 2

Primer coating thickness,

μm

Required number of coatsPrimer consumption,

m²/l

     for dry film      wet coat thickness

(without dilution)

40

 831

 12

701461

6.8

Need help?
info@rilak.lv
+371 67 458 776
Question about the product
Description

The quick-drying primer on an epoxy ester polymer base is intended for priming steel, galvanized and aluminium surfaces for outdoor use. Contains effective anti-corrosion pigments. Alkyd and urethane alkyd enamels on a white spirit base (PENTAPRIM, PENTALUX T, PENTATOP UNIVERSAL, NEOSPRINT 30) as well as water-soluble RIALKID enamels are recommended as top coats after application of the primer.

Usage

Steel surfaces must be free of dirt and corrosion products (rust) and degreased prior to application. Prior to priming, galvanized and aluminium surfaces must be degreased, lightly treated with fine sandpaper or light abrasive blast, washed with 5% aqueous ammonia solution and dried. The air and treatable surface temperature must not be below +5 °C. Air humidity must be not higher than 85%. Apply the primer in 1–2 coats on a clean dry surface with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011²¸0.017²). Dilute the primer with a solvent (SOLVEKS, SOLVEKS SPRINT, xylene) if necessary: up to 8% by volume when applied with a roller or brush. Application of primer by spraying is allowed only in painting facilities of industrial plants and workshops. The same solvents are also used to wash work tools. The drying and curing times until the application of next coats are shown in Table 1. Information on primer consumption for different coating thicknesses (excluding losses during application) is given in Table 2.

Table 1

Temperature of the air and surface to be primed Drying time,

min

Curing time until application of the second coat of NEOSPRINT PRIMER,

h

Curing time until enamel application, h, not less than

Not less than

Not more than

 +10 ºC

601.5  6 *1
 +20 ºC455 *   1

*(if the second coat has not been applied within the specified time after the first coat, then it may be applied only 7 days after application of the first coat)

Table 2

Primer coating thickness,

μm

Required number of coatsPrimer consumption,

m²/l

     for dry film      wet coat thickness

(without dilution)

40

 831

 12

701461

6.8

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
NEOSPRINT PRIMER
6.8 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help