Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

PROTEKSOL 50

Quick-drying anti-corrosion primer/enamel
For interior use
For exterior use
The product can be applied by roller
The product can be applied by brush
The product can be applied with spray gun
The product can be tinted
Use appropriate solvent for diluting and tools cleaning
Drying time 10 h
Packaging 0.9 l, 2.7 l, 9.9 l (A base), 0,85 L ; 2,6 L; 9,5 L ( C bāze ), 10l
Consumption 6.5 - 9.1 m²/l (for one layer. The thickness of the dry film is 50 ÷ 70 μm)
Nearest store
Consumption calculator
Tinting
Description
Usage

PROTEKSOL 50, a quick-drying anti-corrosion primer-enamel on a modified alkyd polymer base, is intended for painting steel surfaces indoors and outdoors. Forms a hard semi-gloss coating with high abrasion resistance. Recommended for painting metal structures, production equipment and other objects without prior priming when there is a need to speed up the painting process. PROTEKSOL 50 primer/enamel can be tinted in the RILAKOLOR system. Base A can be used in white or tinted in light shades. Base C can be tinted in dark shades.

Stir the primer/enamel thoroughly before use. Dilute to working viscosity with white spirit or VAITSOL solvent if necessary: up to 5% by volume when applied with a roller or brush. Application of the primer/enamel by spraying is allowed only in painting facilities of industrial plants and workshops. The same solvents are also used to wash work tools. The air and paintable surface temperature must be between +5 ºC and +35 ºC. Air humidity – not higher than 85%. Steel surfaces must be cleaned from dirt and corrosion products (rust) and degreased before applying the primer/enamel. In cases where complete cleaning of the surface from corrosion products is not possible, it is necessary to clean the loose rust layer as a minimum and perform the maximum possible surface treatment with abrasive tools such as sandpaper, steel brush, grinding machines, etc. In this case, a possible reduction in the anti-corrosion effect should be taken into account. Apply the primer/enamel in 2 coats on clean dry surfaces with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011″–0.017″). Drying time of each coat at +20 ºC is 10 hours (at +10 ºC – 14 hours). The recommended dry film thickness for one coat is 50–70 μm (primer/enamel consumption is 9.1–6.5m²/l per coat, excluding losses during application). Store in a tightly closed container away from direct sunlight.

Need help?
info@rilak.lv
+371 67 458 776
Question about the product
Description

PROTEKSOL 50, a quick-drying anti-corrosion primer-enamel on a modified alkyd polymer base, is intended for painting steel surfaces indoors and outdoors. Forms a hard semi-gloss coating with high abrasion resistance. Recommended for painting metal structures, production equipment and other objects without prior priming when there is a need to speed up the painting process. PROTEKSOL 50 primer/enamel can be tinted in the RILAKOLOR system. Base A can be used in white or tinted in light shades. Base C can be tinted in dark shades.

Usage

Stir the primer/enamel thoroughly before use. Dilute to working viscosity with white spirit or VAITSOL solvent if necessary: up to 5% by volume when applied with a roller or brush. Application of the primer/enamel by spraying is allowed only in painting facilities of industrial plants and workshops. The same solvents are also used to wash work tools. The air and paintable surface temperature must be between +5 ºC and +35 ºC. Air humidity – not higher than 85%. Steel surfaces must be cleaned from dirt and corrosion products (rust) and degreased before applying the primer/enamel. In cases where complete cleaning of the surface from corrosion products is not possible, it is necessary to clean the loose rust layer as a minimum and perform the maximum possible surface treatment with abrasive tools such as sandpaper, steel brush, grinding machines, etc. In this case, a possible reduction in the anti-corrosion effect should be taken into account. Apply the primer/enamel in 2 coats on clean dry surfaces with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011″–0.017″). Drying time of each coat at +20 ºC is 10 hours (at +10 ºC – 14 hours). The recommended dry film thickness for one coat is 50–70 μm (primer/enamel consumption is 9.1–6.5m²/l per coat, excluding losses during application). Store in a tightly closed container away from direct sunlight.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
PROTEKSOL 50
6.5 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help