RIATOP PRIMER, a quick-drying anti-corrosion alkyd primer, is intended for priming steel surfaces exposed to atmospheric influence. Contains effective anti-corrosion pigments. Can be used indoors as a permanent, hard and wear-resistant coating. RIATOP PRIMER is gray. Alkyd and urethane alkyd enamels (RIATOP, PENTAPRIM, PENTATOP UNIVERSAL) are recommended as top coats after priming.
The paintable surface must be cleaned from rust and dirt, using the abrasive cleaning method, and degreased. The degree of purity of the surface to be achieved is Sa 2½ or St 3. Stir primer thoroughly before use. Dilute to working viscosity with xylene or SOLVEKS SPRINT solvent if necessary: 0–5% by volume when applied with a roller or brush. Application of primer by spraying is allowed only in painting facilities of industrial plants and workshops. The air and surface temperature during application must not be below +5 °C. Air relative humidity must not be higher than 85%. Apply the primer in 1–2 coats on a clean dry surface with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011″–0.017″). The drying and curing time until application of the next coats is shown in Table 1. Data on primer consumption for coatings of different thickness are given in Table 2.
Table 1
| Air and paintable surface temperature | Drying time, hours | Curing time until application of the next RIATOP PRIMER as well as RIATOP enamel coats | Curing time until application of enamel PENTAPRIM, PENTATOP UNIVERSAL coats | ||
hours, not less than | hours, not more than * | hours, not less than | hours, not more than | ||
+10 °C | 1.5 | 1.5 | 12 | 1 | There are no restrictions |
| +20 °C | 1 | 1 | 6 | 1 | There are no restrictions |
* If the next coat of RIATOP primer or enamel has not been applied within the specified time after the first coat, it is only allowed to be applied 6 days after the previous coat.
Table 2
Primer coat thickness, μm | The number of coats required to achieve the specified thickness | Primer consumption, m²/l, excluding losses during application | |
| for dry film | for wet layer (without dilution) | ||
40 | 80 | 1 | 12 |
| 80 | 160 | 1 | 6 |
RIATOP PRIMER, a quick-drying anti-corrosion alkyd primer, is intended for priming steel surfaces exposed to atmospheric influence. Contains effective anti-corrosion pigments. Can be used indoors as a permanent, hard and wear-resistant coating. RIATOP PRIMER is gray. Alkyd and urethane alkyd enamels (RIATOP, PENTAPRIM, PENTATOP UNIVERSAL) are recommended as top coats after priming.
The paintable surface must be cleaned from rust and dirt, using the abrasive cleaning method, and degreased. The degree of purity of the surface to be achieved is Sa 2½ or St 3. Stir primer thoroughly before use. Dilute to working viscosity with xylene or SOLVEKS SPRINT solvent if necessary: 0–5% by volume when applied with a roller or brush. Application of primer by spraying is allowed only in painting facilities of industrial plants and workshops. The air and surface temperature during application must not be below +5 °C. Air relative humidity must not be higher than 85%. Apply the primer in 1–2 coats on a clean dry surface with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011″–0.017″). The drying and curing time until application of the next coats is shown in Table 1. Data on primer consumption for coatings of different thickness are given in Table 2.
Table 1
| Air and paintable surface temperature | Drying time, hours | Curing time until application of the next RIATOP PRIMER as well as RIATOP enamel coats | Curing time until application of enamel PENTAPRIM, PENTATOP UNIVERSAL coats | ||
hours, not less than | hours, not more than * | hours, not less than | hours, not more than | ||
+10 °C | 1.5 | 1.5 | 12 | 1 | There are no restrictions |
| +20 °C | 1 | 1 | 6 | 1 | There are no restrictions |
* If the next coat of RIATOP primer or enamel has not been applied within the specified time after the first coat, it is only allowed to be applied 6 days after the previous coat.
Table 2
Primer coat thickness, μm | The number of coats required to achieve the specified thickness | Primer consumption, m²/l, excluding losses during application | |
| for dry film | for wet layer (without dilution) | ||
40 | 80 | 1 | 12 |
| 80 | 160 | 1 | 6 |
Find out how much of the product You will need.
Daugavgrīvas iela 63/65, Rīga, LV-1007
Reģistrācijas Nr.: 40003284444
PVN Nr.: LV40003284444
Banka: A/S Swedbank
Konts: LV23HABA0019308047593
Bankas kods: HABALV22
