Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SAUNALAK

Water-based varnish for the protection of sauna wood panels
For interior use
The product can be applied by roller
The product can be applied by brush
Use water for diluting and tools cleaning
Drying time 1 h
Packaging 0.9 l, 2.7 l
Product can be stored only at temperatures above 5 ºC
Consumption 10 - 15 m²/l
Nearest store
Consumption calculator
Description
Usage

Water-based varnish for the protection of sauna wood panels against the effects of moisture and dirt. Can be used to protect walls and ceilings in saunas and their antechambers and changing rooms. Cannot be used for sauna sweating shelves and benches. Can also be used for varnishing mineral surfaces, such as concrete, plaster and bricks, indoors in cases where the surface is not subject to intense mechanical action, for example, for finishing the walls.

The varnish is semi-transparent during application. After drying, it becomes fully transparent and forms a semi-gloss film. Drying time at 20 °C is 1 hour per coat. Apply the varnish on clean and dry surfaces with a brush or roller in 1–2 coats, if the air temperature is not lower than +5 °C. Stir the varnish before use. The varnish is ready to use and does not need to be diluted. Varnish consumption is 10–15 m²/l per coat. Wash used tools with warm water and soap after use. Store in a tightly closed container at a temperature not lower than +5 °C.

 

Need help?
info@rilak.lv
+371 67 458 776
Question about the product
Description

Water-based varnish for the protection of sauna wood panels against the effects of moisture and dirt. Can be used to protect walls and ceilings in saunas and their antechambers and changing rooms. Cannot be used for sauna sweating shelves and benches. Can also be used for varnishing mineral surfaces, such as concrete, plaster and bricks, indoors in cases where the surface is not subject to intense mechanical action, for example, for finishing the walls.

Usage

The varnish is semi-transparent during application. After drying, it becomes fully transparent and forms a semi-gloss film. Drying time at 20 °C is 1 hour per coat. Apply the varnish on clean and dry surfaces with a brush or roller in 1–2 coats, if the air temperature is not lower than +5 °C. Stir the varnish before use. The varnish is ready to use and does not need to be diluted. Varnish consumption is 10–15 m²/l per coat. Wash used tools with warm water and soap after use. Store in a tightly closed container at a temperature not lower than +5 °C.

 

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
SAUNALAK
10 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help