Decorative waterbased paint containing white soft polymeric flecks. Gorgeous and unique surface sprinkled by white show like inclusions (flakes) is catching your eyes for a moment and then relaxing them by its harmony and elegance and calling to complete relaxation. Structure of  SCINTILLO surface reveals fusion of Antiquity and Modernity in usurpassed  way. SCINTILLO ideally suits for interior decoration either in classical or modern styles.

Prior to SCINTILLO application surface has to be coated by KVARC primer. SCINTILLO forms semitransparent coat, therefore in case of color contrast between base coat (KVARC) and top coat (SCINTILLO) is required it is recommended to tint KVARC in to shade contrasting with the color of SCINTILLO. Application can be conducted at air and surface temperature above +10°C and relative humidity below 85%.  Apply SCINTILLO by wide brush with soft bristles using “criss-cross” or “parallel” movements on to 2-3 m² surface unit. After 5-15 minutes (when clear base of paint is already set, but while polymeric flecks are still wet) surface has to be smoothened by criss-crossed or parallel movements of metal or plastic spatula. Very gentle pressing has to be applied on to the tool while moving spatula over the surface and squeezing white polymeric flecks. Blade of spatula has to be kept at acute angle (as parallel as possible) to surface. Drying time of  SCINTILLO at +20°С – 3 h. Spreading rate: 7-8 m²/l. To provide high degree of washability it is recommended to seal the surface by transparent varnish of required degree of gloss (Ekoakva, Luoten or Paneļu laka can be used). Varnishing of surface also helps to reveal contrast of the structure. In case pearlescent sparkling effect is desired it is also possible (optional) to admix pearlescent powder PERLIUM of required colour directly to the lacquer prior to its application. Painting tools after work has been completed can be cleaned off by warm water with soap. Paint has to be stored at tightly closed pails at temperature above +5°C.