TERRACEOIL with tung oil and wax additives. Thanks to the special formula of the product, the oil creates a decorative coat that perfectly protects the wood against the effects of adverse weather conditions, moisture and dirt. The oil is intended for coating wooden surfaces (including terrace boards, bridges, fences, etc.) outdoors. The oil protects the treated wood from the effects of the atmosphere and dirt, improves the wear resistance of the treated surfaces and inhibits water absorption. It is permitted to use for treating both new and previously oiled or impregnated wood surfaces, provided that they have retained absorbency. TERRACEOIL should only be used in tinted form (the use of an untinted EC Base for treating surfaces outdoors is not permitted).

Oil is ready to use and no dilution is required. Stir TERRACEOIL thoroughly before use. Apply in 1–2 coats on a clean and dry wooden surface with a brush, carefully rubbing along the wood grain. Board ends should be treated with special care. It is recommended to stir the product periodically during use (at least once every half an hour). The ambient air and surface temperature must be higher than +5 ºC during application and drying.  The air relative humidity must not exceed 85%. Drying time at 20±2 °C is 12 hours. Consumption when treating planed surfaces is 9–11 m²/l per coat; 4–7 m²/l per coat for untreated surfaces. Surfaces permanently located outdoors and subject to mechanical wear are recommended to be treated with TERRACEOIL at regular intervals (at least once a year). Wash painting tools with white spirit or solvent after work. It is recommended to use up all of the product. Dispose of empty containers in accordance with local regulations.

Storage. Cold does not affect the product. Store in a tightly closed container in a dry, well-ventilated place, away from heat sources and prolonged exposure to direct sunlight, at a temperature not exceeding +40 ºC, separately from food products or animal feed.